During storage, the boards must be protected from damp, heat, dirt and any possible damage, and at all times you should prevent the boards from becoming distorted, as the damage caused is irreversible.

The panels must be stored in a closed, ventilated place, at an approximate environmental temperature of 10–25ºC and an approximate level of air moisture of between 30 and 70%. After placement and storage, the (metallic) bands from the transport packaging must be cut and removed. In horizontal storage, the boards must be kept flat and supported along their entire surface area. This is the most recommended storage method.

The panels may not be stored vertically; they shall only be supported vertically as a temporary measure and for a short period of time that should always be less than 8 hours.

Prodema will send the boards on a pallet. A protection layer or sheet shall be placed between the pallet and the bottom board, and the boards must be protected with a PVC film.

The floor that supports the pallet must be free of any materials that could damage them.

The storage time should never exceed five months as from the date of issue indicated on the delivery note.