To provide proper ventilated façade function, there must be uninterrupted airflow.

To this end, you must bear the following essential points in mind:

  • The air chamber between the panels and the insulation or enclosure must be at least 20 mm, although national or local law must be followed. See certificates
  • Leave at least a 20 mm opening on the bottom and top of the façade and on doors and windows so that air can flow vertically.
  • It is advisable to only use vertical laths that do not interfere with air flow. If using horizontal strips that make vertical flow difficult, said strips must be perforated such that they provide 20 cm2/m flow in façade coverings of a height up to 1 m and 50 cm2/m for façade coverings with a height greater than 1 m.

Shop Drawings

We develop your project's master blueprints, guaranteeing the certainty of proper installation.

Request Shop Drawing service

Panel Optimization

We calculate how many boards you will need for your project, optimizing the material.

Request Panel Optimization

Accessories

We offer all the accessories for proper installation of our products.

Request supplies

Material Samples

Select the sample you are interested in and we will contact you.

Request your sample

Request Quote

If you need to know prices for your project, we will send you a quote.

Request quote

Contact

Find your nearest contact person or distributor.

Contact