Exposed soffit fastening

This installation system can be removable and it is available for 5/16” (8 mm) thick panels.

These are the available subframe and items for the installation: screws, J and Hat channels, L and T channels and wall brackets

These are installation requirements:

  • Keep between  ¾”and 1 ½” (20 and 40 mm) of distance from the fastener to the edge of the panel.
  • This system requires fasteners every 24” (600 mm).
  • In pieces wider than 12” (300 mm) 3 supporting points are required in every sense
  • When drilling the panel for inserting the fasteners, all the perforations on the panel must be floating, except for one, which must be fixed as recommended of the technical catalogue of ProdEX.

Shop Drawings

We develop your project's master blueprints, guaranteeing the certainty of proper installation.

Request Shop Drawing service